![]()
标准配置详情
LH-6F型化学需氧量(COD)智能回流消解仪随箱物品如下
刺形冷凝管COD专用耗材防爆瓷管锥形瓶使用说明手册保修卡合格证功能特点详情
LH-6F型化学需氧量(COD)智能回流消解仪功能特点详情如下
符合标准
本机在设计上完全依据国家新标准《HJ 828-2017 水质 化学需氧量的测定 重铬酸盐法》的原理设计制造同时兼顾原国标;
The design of this machine is completely based on the principle of the new national standard "HJ 828-2017 Water Quality Determination of Chemical Oxygen Demand Dichromate Method", while taking into account the original national standard;
独立控温
可根据水样特性自由选择加热温度,精准调控沸腾温度,保证每个单元在最佳冷凝状态下以最低功耗达到最佳沸腾效果;
The heating temperature can be freely selected according to the characteristics of the water sample, and the boiling temperature can be adjusted accurately and accurately to ensure that each unit achieves the best boiling effect with the lowest power consumption in the best condensation state;
黑晶面板
耐高温、耐腐蚀、易清理,外观美观,安全系数高;
High temperature resistance, corrosion resistance, easy cleaning, beautiful appearance, high safety factor;
智能操作
根据国标操作要求,内置智能操作模式,一键完成消解冷却过程;
According to the national standard operation requirements, the built-in intelligent operation mode can complete the digestion and cooling process with one button;
批量处理
可批处理量6个样品,仪器升温快、省水、省电操作简单,可靠性高;
Batch processing capacity of 6 samples, instrument fast heating, saving water and electricity Simple operation and high reliability;
风冷系统
可快速降低消解瓶温度,方便取出进行后续测试,大大节约了检测时间;
The temperature of the digestion bottle can be quickly reduced, and it is convenient to take it out for subsequent testing, which greatly saves the detection time;
主机参数一览表
LH-6F型化学需氧量(COD)智能回流消解仪
性能参数
仪器名称 化学需氧量(COD)智能回流消解仪 仪器型号 LH-6F 批处理量 6个 定时精度 0.2秒/小时 定时范围 1分钟-10小时 温度范围 室温~400℃ 测定方法 HJ 828-2017 水质 化学需氧量的测定 重铬酸盐法
GB/T 11914-1989 水质 化学需氧量的测定 重铬酸盐法
物理参数
显示屏 LCD液晶屏 仪器重量 16.5Kg 仪器尺寸 (404 ×434 ×507) mm
工作参数
环境温度 (5-40)°C 环境湿度 相对湿度≤ 85%(无冷凝) 额定电压 AC220V±10% / 50Hz 额定功率 1800W
规格参数 [仪器型号] LH-6F [定时精度 (秒/小时)] 0.2秒/小时 [消解数量] 6个 [定时范围] 1分钟-10小时 [显示方式] LCD液晶屏 [外形尺寸(mm)] (404 ×434 ×507) mm [仪器重量(kg)] 16.5Kg [温度范围] 室温~400℃ [测定方法] HJ 828-2017 水质 化学需氧量的测定 重铬酸盐法 和 GB/T 11914-1989 水质 化学需氧量的测定 重铬酸盐法 [仪器名称] 化学需氧量(COD)智能回流消解仪